Canned tire infilators are single-use devices intended to provide a quick, temporary solution to drivers who experience flat tires. These devices seal the punctured tire and then reinflate it with pressurized gas, providing enough pressure to allow the vehicle to be driven for a short period at low speed.


Automatic Tire Inflator

tire inflator


  • Generates nitrogen from your compressed air
  • Internal nitrogen storage tank
  • Auto-start inflation
  • Automatic zero drift adjustment Remain at last setting
  • Audible and visual end of the cycle signal indicators
  • Self-diagnostic features
  • Vandal resistant mechanical switches
  • Large back light LCD display
  • 2 Nos.*8M/26ft standard hoses with single clip-on closed chuck
  • Comprehensive diagnostics and error reporting
  • Nitrogen purge and fill cycle (N2P)
  • Nitrogen purity test port
  • Adjustable over pressure setting (OPS)
  • Adjustable number of cycles
  • Adjustable lower purge pressure limit
  • 2 air outlets allow simultaneous inflation of up to 2 tires
  • 1 Nos. Nitrogen Outlet to connect the unit and your tire inflation gun

E-1135B-N2P Operation Steps:

  • Set final target pressure using the + and - buttons. The LCD screen will show the target pressure.
  • Connect air hose(s) to tire valve stem(s).
  • FOR TOP-OFF ONLY: Push the “FILL/PURGE” button once.
  • FOR NITROGEN CONVERSION: Push and hold the “FILL/PURGE” button for 2 seconds until the LCD screen shows “N2P”.
  • When unit “beeps” and the LCD screen flashes the target pressure, tyre inflation is complete.

Main Features:

  • Rugged and durable diecast aluminium enclosure
  • Fully automated, fully programmable, micro-processor controlled conversion system
  • Suit for: Car, Light Truck *

Technical Data Summary And Features

  • Dimensions: (Height*Width*Depth) 290mm*230mm*120mm 11.4"*9.1"*4.7"
  • Net Weight : 4kg/8.8lbs
  • Gross Weight: 6.5kg/14.3lbs
  • Packing Size :(Height*Width*Depth) 170mm*500mm*290mm 6.7"*19.7"*11.4"
  • Power Requirement : 100-240Vac 50/60HZ
  • Power Consumption : 10VA
    Operating Temperature Range: -20℃/-4°F to 70℃/158°F
  • MaxInletAir/Nitrogen Supply : 145PSI /10bar /1000kPa
  • Operating Range: 5-102PSI/0.3-7bar/35-700kPa
  • Over Pressure Setting Range: 0-29PSI/0-2.0bar/0-200kPa
  • Accuracy : ±1PSI/0.07bar/7kPa
  • Resolution : 1PSI/0.1bar/5kPa
  • Units of Measurement : PSI/bar/kPa